Average Reviews:
(More customer reviews)The product was as described. As background, the panel is glued to a rubber membrane, and that in turn has a adhesive that is covered with waxed paper until you are ready to instll (glue it down) onto the roof of the RV. When I first rolled out the panel there were some obvious bubbles where the lamenent between the panel and the rubber membrane had separated during storage or shipping ( one panel was from September 2009, another from November 2010 both were the same. I rolled out and left flat for 4 hours in the hot sun and the bubbles id not go away. However, the sun softened the glue so I could insert an old dull dinner knofe (not sharp!) between the panel and the membrane to allow the trapped air to get out. I then used a linoleum roller (a bread rolling pin would work but there would be troubkle on the home front). The knife was a sticky mess, but once the ir was out panel and membrane layed flat. I don't know waht you would do in 50 degree weather - a heat gun and the same knife/and roller might work. I installed 4 panels so I used the provided 10 gauge wire on the roof to a single location where I upsized befor dropping through the roof and to the controller/batteries. I have isolated each panel - each outperforms the 68 watt 4-amp specs, and they do this in partial shade!! and late in the afternoon. Very pleased. When you put a load on the battery, like moving out the slide on and RV, they hang right in there on peak power. I was not impressed with putting 20 holes in the roof to mount each panel with the heavy rubber hardware provided. I see manufacturere now has replaced most of these screws with glue down rubber mounting hardware, but this is clearly older stock. I ended up using standard RV Endurabond roof tape, with RV caulk around its edge to keep its glue from being tacky. Way cleaner, lighter, in weight and color, and, in my opinion, all that is needed to hold a streamline waterproof attachment. ANd way better than rattling hardwar on the roof for a standard metal framed panel. Yes the metal panel is cheaper and more powerful, but too much hassle raising and lowering them every time you stop to get max amps.
Click Here to see more reviews about:
Energy Del Sol FPM-68 68 Watt Flex Solar Power Mat For Recreational Vehicles and Boats
Get 38% OFF
Click here for more information about Energy Del Sol FPM-68 68 Watt Flex Solar Power Mat For Recreational Vehicles and Boats
